Servo Controller – 18 channel control using software
A servo controller is a dedicated board that helps the user to control servos based on the commands sent to it from …
A servo controller is a dedicated board that helps the user to control servos based on the commands sent to it from …
The robot controller is built around the popular chip ATMega 328P running at 16MHz clock controls upto 9 servos and 2 motors. …
A servo controller is a dedicated board that helps the user to control servos based on the commands sent to it from …
An RF module (radio frequency module) is an electronic device used to transmit and/or receive radio signals between two devices wirelessly. Basically …
In the previous tutorials we had seen the Zigbee communication and DC motor control in Raspberry Pi2. Now we have to interface …
As we know that a DC Motor is the equipment which converts electrical power to mechanical power. So it is widely used …
Servos have simple electrical interface – they have 3 wires, one for power, one for ground and the other for the pulse …
Servos have simple electrical interface – they have 3 wires, one for power, one for ground and the other for the pulse …
Servos have simple electrical interface – they have 3 wires, one for power, one for ground and the other for the pulse …
In this wiki section you will find the sample code and the hardware interfacing for controlling a servo motor using Raspberry Pi …